To Next PageTo Next Page
Need help?Do you have a question about the Openbox V9 and is the answer not in the manual?
General| Type | Satellite Receiver |
|---|---|
| Operating System | Linux |
| Tuner Type | DVB-S2 |
| Video Output | HDMI, AV |
| Video Resolution | up to 1080p |
| Aspect Ratio | 4:3, 16:9 |
| Video Decode | MPEG-2, MPEG-4, H.264 |
| Audio Decode | MPEG |
| USB | USB 2.0 |
| HDMI | 1 |
| AV | 1 |
| LNB IN | 1 x LNB IN |
| WiFi | No |
| Power Supply | 12V/1.5A |
Access USB upgrade menu for software, TPLIST, or account loading.
Choose the correct bin file for software or TPLIST upgrade.
Access the network upgrade menu to select software, patch, or TPROG.
Click blue key to search, then red key to start software upgrade.
Use TPPROG menu to select and update TPLIST files like UK or Ireland.
V9S has built-in Wi-Fi; V9 requires specific USB Wi-Fi adapters.
Navigate to Ethernet Config, choose Link Type, and select Wi-Fi Network.
Search for Wi-Fi, enter password, and select Auto Link for automatic connection.
Insert USB drive into the port for backup operations.
Navigate to Tools-Backup for Channel List or Mirror Image Backup.
Select Mirror Image Backup and use the blue key to save data to USB.
Insert USB into another V9S box and go to Tools-Upgrade By USB.
Select 'AllFlash.bin', confirm 'Yes' to flash the new box successfully.
