
Do you have a question about the OpenEye CM-716 and is the answer not in the manual?
| Brand | OpenEye |
|---|---|
| Model | CM-716 |
| Category | Security Camera |
| Language | English |
Covers reading/retaining instructions, attachments, power, and installation.
Safety measures during operation and handling the camera.
Avoid extreme temperatures, humidity, radiation, vibrations, and direct sun.
Compliance with FCC rules and waste disposal directives.
Dangers of high voltage inside and the need for qualified service personnel.
Warnings about electric shock and no user-serviceable parts inside.
General description of the OpenEye outdoor IP dome cameras.
Highlights of the CM-716 series capabilities and benefits.
Items included in the camera package for initial setup.
Diameter and height specifications of the dome camera.
Details of Reset, BNC, Alarm I/O, Audio I/O, Power, and RJ45 ports.
Instructions for connecting power and network cables.
Unscrew Torx screws and remove the inner dome cover.
Unscrew module, detach, mark holes, drill, and insert anchors.
Fasten housing, route cables, and connect power/Ethernet.
Attach module, use IP Finder, and adjust zoom/focus.
Adjust pan/tilt angles and replace the inner dome cover.
Align and securely screw on the outer dome cover.
Run wires through wall and remove the camera's inner cover.
Unscrew the module screw and detach the snap-on module.
Connect cables, attach module, use IP Finder, adjust settings, replace covers.
Finding cameras, default credentials, and browsing.
Initial connection via IP Finder and web browser.
Resetting to default and managing user access roles.
RTSP/MJPEG URLs and network port configuration.
Issues with RTSP over WAN and VPN/tracking solutions.
Overview of Home, System, Streaming, and Camera tabs.
Using live view features and capturing snapshots.
Using Zoom, Focus, Push AF, and Reset buttons for lens control.
Configuring camera identity, time zone, and synchronization.
Changing admin password and accessing user management interface.
Step-by-step guide for user operations.
How the camera obtains an IP address.
Details on IP, subnet, DNS, ports, and gateways.
Enabling and setting up DDNS for remote access.
Setting up SMTP server details for event email notifications.
Configuring FTP server details for alarm messages.
Setting up actions for alarm events like FTP/Email uploads.
Settings for SD recording, email images, and file naming conventions.
Defining detection windows and setting general parameters.
Understanding detection levels, sensitivity, and intervals.
Uploading images via FTP/Email, and sending HTTP notifications.
Setting up file naming conventions for uploaded images.
Managing microSD card status, formatting, and cleanup settings.
Configuring continuous or scheduled recording to the SD card.
Specifying the destination for saved snapshot images.
Accessing and interpreting system operational logs.
Checking user account activity and access rights.
Displaying the current settings of camera parameters.
Procedure for installing new firmware to the camera.
Steps to ensure the viewer software is current and functional.
Managing camera state and configuration settings.
Configuring video resolution, text overlays, and GOP settings.
Adjusting video orientation and H.264 profiles.
Setting compression levels for MJPEG and H.264 video streams.
Selecting streaming protocols and configuring multicast settings.
Optimizing frame rates for bandwidth efficiency.
Defining areas to obscure in the video feed.
Configuring audio communication types and amplification levels.
Selecting appropriate bit rates for audio quality and bandwidth.
Controlling light sensitivity and exposure time.
Adjusting color, backlight compensation, brightness, and sharpness.
Fine-tuning image contrast, color, zoom, IR function, and TV system.
Detailed table of camera hardware and performance specifications.
Specifics on IR range and IP-related features.
Steps to revert browser security settings to their default level.
Configuring browser settings for ActiveX functionality.