Opis 60s - Page 6

6
Format: *05#<0-1>* (0 – no roaming lock, 1- roaming lock enabled)
Example: to disable roaming connecons: *05#1*
⇒ if the new seng is accepted the phone rings once.
If the seng is not accepted the phone rings twice and you can try again.
⓭ Seng the speaker level
The speaker level of the receiver can be changed from 1 (lowest) to 9 (highest). Pick up
the receiver and dial:
Format: *06#<1-9>*
Example: to set the speaker level to 5 (medium): *06#5*
⇒ if the new speaker level is accepted the phone rings once.
⓮ Sending IMEI Number and Network Idencaon by SMS
Somemes our customer service or your network operator may require this informa-
on. You can send it via SMS to any phone number. (Please note that this only works
if your contract includes the sending of text messages and while your Opis desktop
mobile is connected to a network. For sake of simplicity you can also nd the IMEI
number underneath your telephone)
Pick-up the receiver and dial:
Format: *07#<desnaon number>*
Example: to send IMEI and network idencaon to 01234567:
*07#01234567*
⇒ if the SMS was sent, the telephone rings once
⓯ Sending logging informaon to Opis Technology
Opis desktop mobiles support modern network technology worldwide. Due to the
complexity of this, there is a risk of problems occurring. This funcon helps us under-
stand a problem by providing us with relevant data for analysis (no personal informa-
on or caller lists is transferred). Pick-up the receiver and dial:
Format: *001*
Example: to send the phone log to Opis Technology: *001*
⇒ if the log was sent, the telephone rings once
⓰ Forwarding text messages (SMS)
In line with its retro appearance, your Opis desktop mobile does not have a screen.
However, it is somemes required to display text messages (eg when registering a new
SIM-card). For this purpose you can set up forwarding text messages to a number of
your choice. Pick-up the receiver and dial:
Format: *002#<desnaon number>*