Need help?Do you have a question about the Oppo Enco W31 and is the answer not in the manual?
Describes how headphones automatically connect after initial pairing.
Explains the process to connect to a new device via the Function Button.
Details how music playback is controlled by wearing detection.
Explains how to switch audio effects by double-tapping the left headphone.
Details how to check charge status and charge headphones and case.
Instructions on how to reset the headphones to factory settings.
Audio| driver size | 7 mm |
|---|---|
| frequency response range | 20 Hz ~ 20 kHz |
| microphone sensitivity | -38 dBV/Pa |
| supported audio formats | AAC/SBC |
Battery| headphones battery capacity | 25 mAh |
|---|---|
| charging case battery capacity | 350 mAh |
| music play time at 50% volume | 3.5 h (single charge) |
| music play time with charging case | 15 h |
| charging time for headphones | 80 min |
| charging time for headphones and charging case | 150 min |
Connectivity| bluetooth version | 5.0 |
|---|---|
| wireless range | 10 m |
Power| input for charging case | 5 V ⎓ 1 A |
|---|
To Next Page
