Ops-Core AMP - Removing Earcups from Rail Arms

30
REMOVING EARCUPS FROM RAIL ARMS
Removing the Earcups from the Rail Arms:
1. Remove the ear-to-ear cable
from both cable clips (if still
connected).
2. Grasp one earcup with one hand.
With your other hand, place
your thumb on either the rail
arm strap or gimbal point and
use your index nger to grab the
headband strap at the end tip
where it connects to the earcup.
3. Use your index nger to
pull the strap towards you,
which will free the earcup
from the strap.