32
ATTACHING EARCUPS TO HEADBAND
Attaching the Earcups to the Headband:
1. Locate arrow on inside of
headband attachment arm and
ensure that the arrow faces up
when attaching to the earcups.
The headset arm side with the
cable management rubber
straps should be at the rear of
the headset.
2. Attach headband strap outside
of the earcup; snap protruding
element into earcup; repeat on
other side; earcups now attached
to headband.
3. Find / hold center point of
ear-to-ear cable. Fold the middle
cable retention tab over center
point of cable.
Arrow Faces Up
To Next Page
Loading...