Optim O2600 - Maintenance and Care; Cleaning the Dirty Water Tank and Filter; Storage Recommendations

10.
Maintenance
When you have finished cleaning remove the Dirty Water Tank and rinse with
warm water, then allow it to dry before storage. Also remove the filter (as shown)
rinse with warm water and allow it to dry thoroughly before storing.
1. Remove the Dirty Water Tank from the
shampooer.
2. Remove the filter from the water tank and
rinse with warm water and allow it to dry
thoroughly before reinstalling.
IMPORTANT! Do not use any chemicals when cleaning the filter.
Note: Do not store the shampooer with solution in the Clean Water
Tank or dirty water in the Dirty Water Tank. Mineral deposits and
mildew can form and will aect the performance of the shampooer.