Why is the hub doesn't roll well on my Optima Exercise Bike?
If you have recently overhauled the hub you may have over tightened the bearing cups. If not then your hub has probably become contaminated with grit and grind and will need to be disassembled, cleaned and re-greased.
What to do if the pedals feel wobbly on my Optima Exercise Bike?
The pedals may need replacement bearings.
Why do I hear a metallic scraping sound when braking my Optima Exercise Bike?
This sound most likely indicates that your brake pads, rim, or disk are severely worn. Stop using the brake in question until you can replace the pad.
What to do if there is sideward play in the rear swingarm of my Optima Exercise Bike?
Check that all bolts on the swingarm are properly tightened. If this is not the source of the problem please contact your dealer or Optima for info on how to proceed.
What to do if the pedals squeak on my Optima Exercise Bike?
You will most likely need to disassemble the pedals and relubricate them.
What to do if the brakes are too tight on my Optima Exercise Bike?
If you have cable brakes, check to see whether the adjustment barrel is fully screwed into the brake lever.
What to do if the suspension is too soft on my Optima Exercise Bike?
Adjust the preload so that the bike sags only slightly when you sit on it. Now try riding again, adjusting the spring again as necessary.
Why is my Optima Exercise Bike not rolling properly?
Your brakes may be dragging and incorrectly set up. Please refer to your braking equipment manual.
What to do if the brake gets jerky on my Optima Exercise Bike?
Check the rim or disk for wear and trueness, or localized contamination.
What to do if the tire loses air slowly on my Optima Exercise Bike?
Check the tire for tiny holes or valve problems.
General| Brand | Optima |
|---|---|
| Model | Lynx |
| Category | Exercise Bike |
| Language | English |
Explains the importance of reading the manual for optimal performance, comfort, enjoyment, and safety from your new Optima bicycle.
Provides step-by-step instructions for assembling the Optima bicycle from its packaging.
Emphasizes the importance of wearing a certified helmet and provides guidance on proper fit and safety.
Provides essential safety guidelines for cyclists, emphasizing helmet use, awareness, and safe riding practices.
Provides step-by-step instructions for assembling the Optima bicycle from its packaging.
Detailed guide on how to safely install and secure the front and rear wheels.
Essential checks to perform before each ride for safety and proper function.
Daily checks to ensure the bicycle is safe and functioning correctly before riding.
To Next Page