33
Drying
1. Gently dry all parts with a soft and clean cloth.
2. Tilt the nebulizer gently forwards and backwards
(5 to 10 times) to remove all water.
3. Place the parts on a dry, clean, and absorbent
surface, and allow them to air dry completely for
at least 4 hours.
4. Once all parts are fully dry, reassemble
everything and store the device in a dry place.
Ensure the container is completely dry by
shaking it.
Storage
1. Do not store the device in a humid environment,
such as the bathroom. Also, do not transport it
together with damp objects.
2. Store the device away from direct sunlight.
The device is recommended for up to 4000 uses within 3
years. The nebulizer should be stored in a temperature range
between 20 and 55 degrees Celsius. Avoid storing it directly in
sunlight or near open flames or heat sources.
To Next Page
Loading...