EasyManua.ls Logo

OPTIMERA JSL-W303 - Cleaning and Disinfecting

OPTIMERA JSL-W303
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
3. If using a mobile charger, unplug it from the
socket.
4. Remove the mask or mouthpiece.
5. Hold the device and unscrew the cap, then
remove the medication from the medication
container.
6. Clean the device and allow loose parts to dry
thoroughly. Store it in a clean environment for
future use.
When the liquid is depleted, the device automatically turns off.
Due to technical reasons, a small amount always remains in
the device. If the device is not functioning, check if the
batteries need replacement. Alternatively, connect the
nebulizer using the USB-C adapter to verify operation.
4. Cleaning and disinfecting
Follow these hygiene instructions carefully to prevent health
risks. The nebulizer and accessories are intended for repeated
use.
Please note that cleaning and hygienic requirements may vary
depending on different application areas.
1. Make sure to turn off the device.