Assembly and maintenance instruction recirculating ball
OPTIMUM
MASCHINEN - GERMANY
5. Dezember 2007Page 26 Recirculating ball screw assembly and maintenance instruction ; Version 2.0
© 2007
GB
1.6.6 Assembly X-axis
£ Assemble the support of the X-axis
on the spindle nut of the recircula-
ting ball screw using the attached
fixing material.
£ Before fixing the screws apply a
securing mean.
£ Put the recirculating ball screw on
the cross table.
INFORMATION
If the support (X-axis) does not fit into
the recess, you need to expand the
radiuses on the supports of the X-axis.
If necessary, adapt the oversize of the
support to match the dimension of the
recess. Please make sure that the sup-
port properly suits the clamping sur-
faces.
Fig.1-52: Assemble support
Hexagon socket
screw
Support X-axis
Spindle nut
Support X-axis
Securing mean
Recirculating ball
screw X-axis
Cross table
Support X-axis
Radiuses
Clamping surfaces
Cross table
To Next Page
Loading...