Optimum CS 275 SA - Default Chapter; Table of Contents

Page 2
Table of Contents
1 Safety
1.1 Safety warnings (warning notes)
1.1.1 Classification of hazards
1.1.2 Other pictograms
1.
2 Proper user
1.
3 Possible dangers caused by the circular metal saw
1.
4 Qualification of personnel
1.4.1 Target group
1.4.2 Authorised personnel
1.
5 User positions
1.
6 Safety devices
1.6.1 Prohibition, warning and mandatory labels
1.
7 Individual protection gear
1.
8 Safety during operation
1.
9 Safety during maintenance
1.9.1 Disconnecting the circular metal saw and making it safe
1.9.2 Using lifting equipment
1.9.3 Mechanical maintenance work
1.1
0 Accident report
1.1
1 Electrical system
2 Technical data
3 Assembly
3.1 Extent of supply
3.
2 Storage
3.
3 Installation and assembly
3.3.1 Requirements of the installation site
3.3.2 Fasten the substructure of the circular metal saw on the floor
3.3.3 Mount the saw on the machine substructure
3.
4 First use
3.4.1 Checking
3.4.2 Direction of the saw teeth
3.4.3 Check the oil level in the worm gear
3.4.4 Fill in coolant
3.4.5 Power supply
3.4.6 Check the running direction of the saw blade
3.4.7 Check if the air entrance leak air
3.4.8 Check the function of the travel switch
4 Operation
4.1 Safety