Page 7
INFORMATION
All
staff involved in assembly, commissioning, operation and maintenance must
• be duly qualified,
• follow this operating manual.
In the event of improper use
• there may be a risk to the staff,
• there may be a risk to the circular metal saw and other material property,
• the proper operation of the circular metal saw may be affected.
Discon
nect the circular metal saw whenever cleaning or maintenance work is being carried out.
WAR
NING!
THE CIRCULAR METAL SAW MAY ONLY BE USED WITH THE SAFETY DEVICES ACTI-
VA
TED.
Disconnect the circular metal saw whenever you detect a failure in the safety devices or
whe
n they are not fitted!
All
additional installations carried out by the operator must incorporate the prescribed
safety devices.
Being
the machine operator, this will be your responsibility!
“Safety devices“ on page 8
1.4 Qualification of personnel
1.4.1 Target group
This manual is addressed to
• users,
• operators,
• maintenance staff.
The warning notes therefore refer to both operation and maintenance of the circular metal saw.
De
termine clearly and irrevocably who will responsible for the different activities on the machine
(use, maintenance and repair).
Vague or unclear assignment of responsibilities constitute a safety hazard!
Always
disconnect the circular metal saw from the power supply and secure the circular metal
saw
against restarting.
1.4.2 Authorised personnel
WARNING!
In
correct use and maintenance of the circular metal saw constitutes a danger for the
staff, objects and the environment.
Only
authorised personnel may operate the circular metal saw!
The only staff authorised to use this machine and perform maintenance on it are trained and
instructed technical staff working for the operator and manufacturer.
The operator must
Obligations
of the opera-
to
r
• train staff,
To Next Page
Loading...
