8 // OPTIM U M M A GICOOK PRO
TINCTURE FUNCTION
DO NOT have any open flame around the prep materials, the infuser unit, or the finished products if you
are making your tincture with ethanol alcohol. If you have any doubt at all about heating alcohol, use
a non-heat method for making your tincture. There are numerous methods and recipes posted on the
internet. Only use this function if you have done it before and know the risks involved. Please read the
disclaimer in the safety section page marked #3. We also do not recommend using alcohol and refer
people to use Glycerin because of the higher risk involved.
Glycerin is considered safe to heat but it is still in the alcohol family. Do not take any unnecessary
chances with open flames around Glycerin either.
DIRECTIONS:
For a 1/2 batch-14grams (1/2 oz) decarbed herb with 470-590ml (2-2 1/2) Cups of vegetable glycerin or
95% ethanol alcohol (150-190 proof).
For a whole batch-28 grams (1oz) decarbed herb with 950-1180ml (4-5 cups) of vegetable glycerin or 95%
ethanol alcohol.
The preset tincture function will run for 4 hours at 70 160 . The blades will cycle on for 20 second
intervals starting when the temperature reaches 53 128 . You can also set your own custom time and
temperature.
When the cycle has finished , follow the directions in the STRAINING section of this manual.
SAFETY!! HEATING ALCOHOL RELEASES HIGHLY FLAMMABLE FUMES.
To Next Page
Loading...