2 // OPTIMUM M A GICOOK PRO
• Connect the power cord below the handle on the base and plug into outlet.
• Load the main chamber with ingredients and press the top control unit on firmly.
• Press the “CHOOSE” button to cycle through the available options
• Once your desired option is flashing hit the start button to use the preset time and temperature
settings.
• You can also use your own custom settings for time and temperature. While the desired option is
flashing set your desired time using the “Time” button. Time increases in 5 minute increments with
each button press. Time range is 30 mins to 12 hours.
• Set desired temperature with “Temp” button. Temperature increases in one-degree increments.
Temperature range is from -1 120 (30 F to 250 F).
• Once your custom settings are ready press “START”
• Machine mixing blades will automatically start when 80% of set temperature is reached (Except for
decarb setting). Blades will turn on in regular, even intervals.
• END”
• To stop the unit at any time , press and hold the start button for 3 seconds
• There are MIN and Max fill lines marked inside the container. Do not Under or Overfill the infuser.
• CAUTION!! The contents and inside of the main container will be very hot immediately after shutting
down and while unit is operating.
• Do NOT submerge either the top or bottom sections in water
• SAFETY ALERT!! Tinctures can be made in the infuser by heating ethanol alcohol,
which releases HIGHLY FLAMMABLE FUMES. DO NOT USE FLAMMABLE MATERIALS
IN INFUSER.
BASIC OPERATION
To Next Page
Loading...