Optimum OPTI drill DH 32GS User Manual

Betriebsanleitung - DE
Operating manual - EN
Version 1.2.9
Getriebebohrmaschine
Geared drill
Artikel Nr. Item no. 303 4220
Artikel Nr. Item no. 303 4230
Artikel Nr. Item no. 303 4240

Optimum OPTI drill DH 32GS Specifications

General

Drilling capacity in steel (diameter)	32 mm
Spindle mount	MT 4
T-slots size	14 mm
Column diameter	115 mm
Net weight	350 kg
Voltage	400 V
Spindle speed range	75 - 3200 rpm
Number of speeds	12
Motor power	1.5 kW
Power	1.5 kW

Summary

1 Safety

1.2 Safety Instructions (Warning Notes)

Explains warning symbols and their meanings for safety.

1.3 Intended Use

Defines the intended use and limitations of the machine.

1.4 Reasonably Foreseeable Misuse

1.5 Possible Dangers Caused by the Geared Drill

Lists potential hazards associated with the machine.

1.6 Qualification of Personnel

Specifies required qualifications for personnel.

1.8 Safety Measures During Operation

Outlines safety measures during operation.

1.9 Safety Devices

Describes the machine's safety features.

1.10 Safety Check

Covers procedures for safety checks.

1.11 EMERGENCY-STOP Push Button

Explains the emergency stop button's function.

1.11.1 Main Switch

1.11.2 Drill Chuck Protection

1.12 Personal Protective Equipment

Lists required personal protective equipment (PPE).

1.13 Safety During Operation

General safety guidelines for operation.

1.14 Safety During Maintenance

Safety procedures for maintenance.

1.14.1 Disconnecting and Securing the Geared Drill

3 Delivery, Interdepartmental Transport, Assembly and Commissioning

3.1 Notes on Transport, Installation, Commissioning

3.1.1 General Risks During Internal Transport

3.2 Installation and Assembly

3.4.3 First Commissioning

Guides initial startup and safety checks.

3.4.5 Power Supply

Details power connection requirements and safety.

4 Operation

4.1 Safety

Safety prerequisites for operation.

4.2 Before Starting Work

Preparatory steps before starting work.

4.3 During Work

Guidance on safe operation during machining.

4.5 Control and Indicating Elements

4.6 Control Panel DH26GT and DH28GS

Details the control panel for DH26GT/DH28GS models.

4.7 Switching the Machine On

Instructions for turning the machine on.

4.8 Switching Off the Machine

Instructions for turning the machine off.

4.8.1 Gear Selector Switch - DH26GT ǀ DH28GS

4.8.2 Speed Table - DH 26 GT ǀ DH 28 GS

4.9 Disassembly, Assembly of Drill Chucks and Drill Bits DH26GT ǀ DH28GS

Procedures for removing/installing drill chucks and bits.

4.10 Control and Indicating Elements DH32GS

Controls and indicators for DH32GS.

4.11 DH32GS AC Control Panel

Details the AC control panel for DH32GS.

4.12 DH32GS - Touch Panel

Details the Touch panel for DH32GS.

4.13 Switching the Machine On - DH32GS

Switching on the DH32GS.

4.14 Switching the Machine Off - DH32GS

Switching off the DH32GS.

4.14.1 Gear Selector Switch - DH32GS

4.14.2 Speed Table DH 32 GS

4.16 Disassembly, Assembly of Drill Chucks and Drill Bits

Procedures for removing/installing drill chucks and bits.

5 Determining the Cutting Speed and the Speed

5.1 Table Cutting Speeds / Infeed

Tables for cutting speeds and feed rates.

5.2 Speed Table

Spindle speed tables.

5.2.1 Examples to Calculatory Determine the Required Speed for Your Drilling Machine

6 Maintenance

6.1 Safety

Safety precautions for maintenance.

6.1.1 Preparation

6.1.2 Restarting

6.2 Inspection and Maintenance

Routine inspection and maintenance procedures.

6.3 Repair

Information on performing repairs.

6.4 Cooling Lubricants and Tanks

7 Malfunctions

9 Spare Parts

9.1 Spare Part Ordering