Need help?Do you have a question about the Optimum OPTI drill D 17Pro and is the answer not in the manual?
Explains symbols used in the manual for clear communication.
Details information found on the machine's identification plates.
Defines safety warning symbols and their associated dangers.
Describes the machine's built-in safety features and their function.
Lists critical safety rules for performing work on the machine.
Covers electrical connection, motor power, and drilling capacity.
Details physical measurements, table features, and tool interfaces.
General guidance on safe transport, installation, and commissioning procedures.
Step-by-step guide for assembling the drilling machine components.
Guide for installing the drill chuck and its safety guard.
Instructions on preparing the ground and securely fixing the machine.
Detailed steps for connecting the machine to the power supply.
Identifies and explains the function of all controls and indicators.
Step-by-step guide for safely starting and stopping the machine.
Safety precautions and operational advice for use during drilling.
Guide on how to properly install and secure the drill chuck.
Data tables for recommended cutting speeds and material infeed.
Table correlating RPM with drill bit diameter and cutting speed.
Crucial safety precautions for performing maintenance tasks.
Information on how to contact authorized service personnel for repairs.
Details on required information and contacts for ordering spare parts.
Detailed list of parts required for the drill chuck safety guard assembly.
Explains the purpose and location of various labels on the machine.
Schematic showing the electrical connections for 230V models.
Schematic showing the electrical connections for 400V models.
Table of common malfunctions, their causes, and suggested solutions.
Contains copyright information and liability/warranty terms.
Definitions of technical terms used throughout the manual.
Manufacturer request for feedback on product performance and issues.
Details of the manufacturer and applicable EU directives and standards.
To Next Page
General