OPTIMUM
MASCHINEN - GERMANY
Safety
Version 1.0.2 vom 2016-1-28 Page 5Original operating instructions
GU15 │GU18 │GU20 │GU20S │GU20P│GU25│GU25S│GU25P GB
1.1.2 Other pictograms
1.2 Intended use
WARNING!
In the event of improper use, the grinding machine
will endanger personnel,
will endanger the grinding machine and other material property of the operator,
the correct function of the grinding machine may be affected.
The machine is designed and manufactured exclusively for grinding and polishing metals using
properly authorised grinding wheels, sanding belts or polishing wheels.
The grinding machine must be used exclusively for this purpose.
If the grinding machine is used in any way other than described above, modified without author-
ization of Optimum Maschinen Germany GmbH, then the grinding machine is being used
improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that any constructive technical or procedural changes which had not
been performed by the company Optimum Maschinen Germany GmbH will render the guaran-
tee or CE conformity null and void. It is also part of intended use that
the limits of performance of the grinding machine are observed,
the operating manual is observed,
the inspection and maintenance instructions are observed.
Activation forbidden! Warning of flammable
substances!
Warning: suspended loads!
Warning: risk of stumbling!
Warning: tilting danger! Warning: automatic start-
up!
Warning of biological
hazard!
Warning of injuries to
hands!
Read the operating instruc-
tion!
Pull the mains plug! Wear protective glasses! Use face shield!
Wear safety shoes! Wear a protective suit!
Use ear protection! Protect the environment!
To Next Page
Loading...
Need help?
General
