Need help?Do you have a question about the Optimus AMX-25 and is the answer not in the manual?
Transmitter Specifications| operating frequency range | 912.5–914.5 MHz |
|---|---|
| power source | 18V DC, 150 milliamps |
Speaker Specifications| frequency response | 50 Hz–15 kHz |
|---|---|
| S/N ratio | 55 dB |
| stereo separation | ≥ 20 dB |
| audio distortion | ≤2% |
| operating range | 150 Feet (Open Field) |
| automatic frequency control (AFC) | More than ±150 kHz |
| tuning range | ≥913.5 ±1.25 MHz |
| minimum volume hum | < 2mV |
| bass boost effect (100 Hz) | 8 ±2 dB |
| power | 10 Watts RMS |
| power source | 15V DC, 800 milliamps |
| speaker elements | 2-Inch Tweeter, 4-Inch Woofer |
FCC guidelines on potential interference from wireless devices and how to resolve it.
Connect the transmitter to your audio source's output or headphone jack.
Select locations for speakers and connect them to power outlets.
Tune speakers to avoid interference from other 900 MHz devices.
Steps to resolve common issues like no sound or distorted audio.
To Next Page
