17
3. Press
RECORD
. Recording begins when the voice-
activation mechanism detects a sound.
4. To cause soft sound levels to activate recording,
rotate
VOLUME/VOX SENS
toward
MAX
. To automati-
cally record only louder sounds, rotate
VOLUME/VOX
SENS
toward
MIN
. (This does not change the volume
of the recording.)
The RECORD BATTERY indicator lights during
recording. The louder the sound, the brighter the indi-
cator glows.
Manual Recording
Set
VOICE ACTIVATION
to
OUT
, then press
RECORD
to
record continuously. For the best quality recordings,
place the recorder 1 to 5 feet from the sound source.
Recording automatically stops when the recorder
reaches the end of the tape side. To manually stop
recording, press
STOP
.
Illust.
14-1111.fm Page 17 Thursday, July 1, 1999 12:55 PM
To Next Page
Loading...
