EasyManua.ls Logo

Optimus CTR-106 - Cleaning Tape-Handling Parts

Optimus CTR-106
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Use only fresh batteries of the required
size and type. Batteries can leak chemicals
that damage your recorder’s electronic
parts.
Wipe the recorder with a damp cloth occa-
sionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or
strong detergents to clean the recorder.
Modifying or tampering with the recorder’s internal parts
can cause a malfunction and might invalidate your re-
corder’s warranty. If your recorder is not operating as it
should, take it to your local RadioShack store for assis-
tance.
CLEANING THE TAPE-HANDLING
PARTS
Dirt, dust, or particles of the tape’s coating can accumu-
late on the tape heads and other parts that the tape
touches. This can greatly reduce the performance of the
cassette player. To prevent noise and poor high-frequen-
cy response, clean the cassette player’s tape-handling
parts after about 20 hours of use. Your local RadioShack
store sells cassette deck head-cleaning kits.
14-1111.fm Page 21 Thursday, July 1, 1999 12:55 PM

Related product manuals