22
1. Disconnect all power sources.
2. Open the cassette compartment door.
3. Hold down the erase protection tab sensor, then
press
RECORD
to expose the tape-handling parts.
4. Use a cotton swab dipped in denatured alcohol or
tape head-cleaning solution to clean the record/play
head, pinch roller, capstan, erase head, and tape
guides.
5. When you finish cleaning, press
STOP
and close the
compartment. Then reconnect power.
Illust.
14-1111.fm Page 22 Thursday, July 1, 1999 12:55 PM
To Next Page
Loading...
