22
To prevent accidental erasure of a tape recording, use a screw-
driver to remove one or both of the cassette tape’s erase-
protection tabs. This prevents
RECORD
from being pressed.
If you later decide to record on a tape side after you have re-
moved its erase-protection tab, place a piece of strong plastic
tape over that side’s erase-protection hole. Be sure you cover
only the hole originally covered by the erase-protection tab.
Caution:
Removing the erase-protection tabs does not prevent
a bulk tape eraser from erasing a cassette tape.
A
14-1122.fm Page 22 Wednesday, May 17, 2000 9:55 AM
To Next Page
Loading...
