Need help?Do you have a question about the Optimus EP-44SIP and is the answer not in the manual?
Describes how to access the device's web interface using a web browser.
Explains the main areas of the web interface: Configuration, Management, Diagnostics, Admin, Home, Login out, Navigation tree.
Allows basic configuration of network parameters and SIP user account.
Provides extended network parameter settings for the device.
Configures network parameters like IP address, DNS, MAC address, and port modes.
Enables the LAN port to function as a hub for the WAN port.
Configures VLAN assignment for separating voice and data traffic.
Manages advanced settings for Voice Over IP (VoIP) configurations.
Advanced settings related to SIP signaling protocols.
Configures general SIP parameters like transport protocol, local port, and gateway name.
Configures SIP proxy, registrar IP, port, and registration expiry settings.
Manages SIP timer parameters for retransmissions and session timeouts.
Sets Quality of Service (QoS) parameters for packet prioritization.
Defines various call dialing parameters and behaviors.
Configures dialing timeouts, number length, and tone settings.
Configures the operation of relay 1 and relay 2, including activation modes and trigger keys.
Sets numeric codes for latching relay 1 and relay 2 open or closed states.
Enables and configures automatic answering of incoming calls.
Configures cycle dialing behavior for speed dial functions.
Sets a timeout alarm for picking up the handset without dialing.
Sets the default audio device for answering or initiating calls.
Configures automatic redialing when the called party is busy.
Configures the primary button for SIP dialing, including phone number and repeat function.
Manages media streaming parameters like RTP port range and payload type.
Configures RTP port range and DTMF Relay RFC 2833 payload type.
Sets Quality of Service (QoS) parameters for routing voice packets.
Determines and prioritizes audio codecs for voice transmission.
Configures Secure Real-Time Transport Protocol (SRTP) for encrypted RTP data.
Configures RTCP-XR for monitoring voice quality statistics.
Adjusts volume levels for tones and ringer.
Configures tone and ringer volumes for the device.
Adjusts speaker and microphone volume for handsfree operation.
Configures account settings for Line 1 and Line 2, including registration details.
Defines call forwarding features and their activation conditions.
Configures LED behavior and simulates key presses for device status.
Accesses advanced features like date, time, and NTP settings.
Manually configures the device's date and time settings.
Configures daylight saving time settings, including start and end times.
Configures Network Time Protocol (NTP) server and time synchronization.
Manages automatic firmware and configuration updates.
Configures automatic provisioning settings via DHCP server.
Allows manual backup, restore of configuration, and firmware upgrades.
Manages the device's configuration file for backup and restore.
Provides the interface to upload and install new firmware.
Controls user accounts, factory resets, and system restarts.
Manages administrator accounts for web server login.
Resets the device to its factory default settings.
Allows rebooting the device.
Configures remote management protocols like TR-069 and Telnet.
Enables or disables the TR-069 protocol for remote configuration.
Enables or disables the Telnet protocol for remote access.
Configures the report URL for device changes and JSON integration.
Monitors the device's status, including network and SIP parameters.
Displays detailed network status, LAN information, and port status.
Shows the phone status, call status, and line registration status.
Retrieves and displays internal device information, savable as a text file.
Provides access to view call history (missed, received, dialed).
Displays a resume view of missed, received, and dialed calls.
General| Brand | Optimus |
|---|---|
| Model | EP-44SIP |
| Category | Intercom System |
| Language | English |
To Next Page
