Optimus Range - Page 2

‘CoMMTEL GSM oNE’ aPP APP GUIDE
ADDITIONAL MANUAL SMS CoMMaNdS
z
Where you see SERIALNUM in the command alert, replace with the SERIALNUM of the panel to be programmed.
z
Text the commands to the ‘tel number’ associated with the panel you wish to program.
z
Activate Timed Trade Button
To set up the trade button 07:00 to 17:30 Mon-Fri, rst set the Time Prole by sending
SERIALNUM prole 1 start 07:00 end 17:30 days Mo Tu We Th Fri
And then set the Trade Button to use it by sending SERIALNUM trade periods 1 relay 1 pulse
z
Deactivate Timed Trade Button
To turn off the Trade Button, send the command SERIALNUM delete trade
z
Activate Aux Input 1 Triggered SMS Alerts
To set up SMS alert when aux input 1 is triggered for more than fteen minutes and send the message to ‘tel number’.
SERIALNUM alert 1 aux 1 delay 900 send ‘tel number’ msg Your gates have been open for 15 minutes
z
Dectivate Aux Input 1 Triggered SMS Alerts
To turn off the aux input 1 SMS alert, send the SMS command SERIALNUM delete alert 1
z
Activate Recurring SMS Alerts
To set up SMS alert which is sent at regular six monthly intervals, starting o
n
the 20th of November at 2.30pm and
sending the SMS to ‘tel number’, send the SMS command
SERIALNUM alert 5 recur every 6 months next 20/11/2019 14:30 send ‘tel number’ msg Your gates are due for servicing
z
Dectivate Recurring SMS Alerts
To turn off the recurring SMS alert, send the SMS command SERIALNUM delete alert 5
z
Check the Signal Level
To nd out the mobile phone signal level of the panel, send the SMS command SERIALNUM get signal and wait for the reply