21
English
User Controls
The Projector has multilingual On-screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control.
2 When OSD is displayed, use
keys to select any item in the
main menu. While making a selection on a particular page, press
or “ ” key to enter sub menu.
3. Use
keys to select the desired item and adjust the settings
by
key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “ ” to conrm, and the screen will return to the main
menu.
6. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
On-screen Display Menus
Main Menu
Sub Menu
Setting
To Next Page
Loading...
Need help?
General
