Need help?Do you have a question about the Optoma EH490 and is the answer not in the manual?
General| Display Technology | DLP |
|---|---|
| Projection Size | 30 - 300 inches |
| Input Lag | 16 ms |
| Brightness | 5, 000 ANSI Lumens |
| Contrast Ratio | 50000:1 |
| Connectivity/I/O | HDMI, VGA, USB, RS-232 |
| Resolution | 1080p Full HD (1920x1080) |
| Lamp Life | 10000 hours (Eco) |
Essential safety instructions for operating the projector, covering ventilation, liquids, and environmental conditions.
Precautions and warnings related to health risks associated with viewing 3D content, including photosensitive seizures.
Illustrations and descriptions of input/output connectors for 1080P/WXGA models.
Illustrations and descriptions of input/output connectors for XGA models.
Detailed instructions and diagrams for connecting various sources to 1080P/WXGA projectors.
Detailed instructions and diagrams for connecting various sources to XGA projectors.
Procedures for adjusting the projector's physical image parameters like height, zoom, and focus.
Step-by-step guide for turning the projector on, off, and understanding standby mode.
Explanation of how to navigate the On-Screen Display (OSD) menus and use its features.
How to correct keystone distortion and fine-tune image corners for perfect alignment.
Instructions for setting up and configuring 3D display modes, formats, and synchronization.
Setting up projector security features like password protection and security timers.
Configuring network settings such as DHCP, IP Address, Subnet Mask, Gateway, and DNS.
Step-by-step instructions and safety warnings for replacing the projector lamp module.
Guidance for resolving common projector issues like no image, focus problems, and image distortion.
Explanation of LED indicators and messages for status, errors, and potential overheating.
To Next Page
