To Next PageTo Next PageWhat to do if my Optoma EP1690 Projector has no power?
If your Optoma Projector is not powering on, make sure the power cord is securely connected to both the projector and the AC power outlet. Also, check the lamp cover and interrupt switch. Ensure all connectors are securely connected and not broken. In addition, check DC-DC, Ballast and Main Board.
Display| brightness | 2500 Lumens |
|---|---|
| native resolution | 1280 x 768 |
| contrast ratio | 2500:1 |
Lamp| lamp life | 2500 Hours (ECO) |
|---|---|
| lamp type | 220W UHP |
Projection| throw ratio | 1.58 to 1.90:1 |
|---|---|
| projection distance | 5’ to 40’ (1.5 to 12 m) |
| image size | 28” to 300” (0.71 to 7.62 m) |
Operating Environment| operating temperature | 5 to 35 C° |
|---|---|
| storage temperature | -20 to 60 C° |
| humidity | 80% Max Humidity |
Power| power supply | AC Input 100-240 Volts, 50 - 60Hz |
|---|---|
| power consumption | 295 Watts ± 10% Full Power |
| standby power | <13W |
Audio and Video Connections| DVI-D connection | w/HDCP |
|---|---|
| VGA connection | Two VGA (YPbPr/RGB/SCART) |
| additional connections | S-Video, Composite Video, Four Audio Inputs, USB, RS-232, VGA-Out |
Dimensions and Weight| dimensions | 13.56” x 3.72” x 9.67” (344 x 94 x 246 mm) |
|---|---|
| weight | 7 lbs (3.2 kg) |
| uniformity | 85% |
