Need help?Do you have a question about the Optoma EX536 and is the answer not in the manual?
Display| display type | Single 0.55” DMD DLP Technology by Texas Instruments |
|---|---|
| native resolution | XGA (1024 x 768) |
| maximum resolution | UXGA (1600 x 1200) |
| brightness | 2800 ANSI Lumens |
| contrast ratio | 3000:1 (Full On/Full Off) |
| lamp life | 4000/3000 Hours (STD/Bright) |
Projection| throw ratio | 1.95 to 2.15:1 (Distance/Width) |
|---|---|
| projection distance | 3.28’ to 32.8’ (1.0 to 10m) |
| image size (diagonal) | 22.9” to 300” (0.58 to 7.62m) |
| aspect ratio | 4:3 Native, 16:9 and 16:10 Compatible |
Audio and Connectivity| audio | 2-Watt Speaker |
|---|---|
| i/o connectors | Two VGA-In, VGA-Out, S-Video, Composite Video, Audio-In, Audio-Out and RS-232 |
| remote control | IR Remote |
Operating Environment| operating temperature | 41 to 104°F (5 to 40°C), 85% Max Humidity |
|---|---|
| noise level | 28dB/30dB (STD/Bright) |
| keystone correction | ±40° Vertical |
Power| power supply | AC Input 100-240 V, 50-60Hz, Auto-Switching |
|---|---|
| power consumption | 255 Watts (Bright), 230 Watts (STD), <1 Watt (Standby) |
| horizontal scan rate | 15.3 - 91.1 KHz |
Dimensions and Weight| weight | 5 lbs (2.27kg) |
|---|---|
| dimensions (w x h x d) | 11.28” x 3.98” x 7.6” (287 x 101 x 193 mm) |
| uniformity | 85% |
To Next Page
