To Next PageTo Next Page
Need help?Do you have a question about the Optoma EX540i and is the answer not in the manual?
Table detailing LED status messages for various projector states and errors.
Troubleshooting guide for common symptoms like no power, auto shutdown, and no image.
Defines acceptable limits for pixel defects, blemishes, and dots on screen.
Procedure for testing projector functionality with PC input signals.
Tests for CVBS, S-Video, HDTV/Component, HDMI, and Audio performance.
Procedure for calibrating ADC (Analog-to-Digital Converter) for video and RGB signals.
Procedures to measure brightness, contrast, and uniformity of the projected image.
Steps for setting up network connectivity and testing projector IP and network settings.
Equipment and procedures for upgrading system firmware using DLP Composer Lite.
Step-by-step guide for installing the DLP Composer Lite software.
Instructions for installing the necessary USB drivers for firmware upgrades.
Detailed steps for performing the firmware upgrade using DLP Composer Lite.
Equipment and procedures for upgrading system firmware via RS232 for ES523ST/EW533ST.
Detailed steps for upgrading firmware via RS232 for specific models.
Equipment and procedures for upgrading the 8051 microcontroller firmware.
Step-by-step guide for installing the NLINK setup program.
Instructions for installing Manley USB drivers for firmware upgrades.
Procedure for performing the 8051 firmware upgrade using NLINK software.
Equipment and procedures for upgrading firmware over the network.
Steps to find and record the projector's IP address for network operations.
Procedure for configuring PC network settings to match the projector's network.
Instructions for accessing the projector's web interface for firmware updates.
General