H
Hannah BrownAug 10, 2025
What to do if Optoma EX610ST shows Error (Over Temp.)?
- MMichael ShafferAug 10, 2025
If your Optoma Projector displays an 'Error (Over Temp.)' message, turn off the projector and allow it to cool down.
To Next PageTo Next PageWhat to do if Optoma EX610ST shows Error (Over Temp.)?
If your Optoma Projector displays an 'Error (Over Temp.)' message, turn off the projector and allow it to cool down.
What to do if Optoma EX610ST shows Error (Fan fail)?
If your Optoma Projector displays 'Error (Fan fail)', check the fan for any blockages and make sure that it is working as it should.
How to fix Optoma Projector Error (Lamp fail)?
To fix the 'Error (Lamp fail)' on your Optoma Projector, replace the lamp.
General| Brightness | 3000 ANSI Lumens |
|---|---|
| Resolution | XGA (1024x768) |
| Contrast Ratio | 3000:1 |
| Display Technology | DLP |
| Lamp Life | 4000 hours (Normal mode) |
| Zoom Ratio | 1.2x |
| Keystone Correction | ±40° vertical |
| Lamp Type | 190W |
| Inputs | VGA, S-Video, Composite Video |
| Outputs | Audio Out |
