Optoma Pico PK201 User Manual

6
Photo Setup
Slideshow Duration: Select duration of
slideshow (Off, 2 sec., 5 sec., 10 sec.).
Slideshow Repeat: Enable slideshow
repeat (Off, Repeat All).
Video Setup
Play Mode: Select play mode (Off,
Repeat All, Single).
Report
System Setup
Language: Select preferred language
for on-screen menus.
LED Mode: Select LED mode (Bright,
STD).
Projection: Select the projection mode
(Front Desktop, Rear Desktop, Front
Inverted, Rear Inverted).
Version: Displays firmware version.
HOW TO USE THE MENU - SOURCE: INTERNAL MEMORY, MICRO SD CARD, AND USB FLASH DRIVE
Playing Videos from the Internal Memory / Micro SD Card / USB Flash Drive
Displaying Photos from the Internal Memory / Micro SD Card / USB Flash Drive
Presentation from the Internal Memory / Micro SD Card / USB Flash Drive
Navigating the Settings Menu
16
Adjust Volume
00:05 00:28
Fast forward
Rewind
Play /Pause
Finance
Department
Exit Video mode
or
or
or
or
or
or
or
or

Optoma Pico PK201 Specifications

General

Projection distance	0.24 - 3.24 m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	5 - 70 \
Projector native resolution	WVGA (854x480)
Aspect ratio	-
RS-232 ports	0
Dimensions (WxDxH)	61 x 118 x 17 mm
Connectivity technology	Wired
Focal length range	- mm
Light source type	LED
Service life of light source	20000 h
RMS rated power	0.5 W
TV tuner integrated	No
Number of built-in speakers	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	0 dB
Battery life (max)	1.5 h
Power consumption (standby)	- W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Weight	160 g