How to fix reversed image on Optoma Projector?
If the image on your Optoma Projector is reversed, you can correct it by selecting “Setup --> Display --> Projection” from the OSD and setting the appropriate projection direction.
General| Projection distance | - m |
|---|---|
| Projection technology | LED |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 40 - 70 \ |
| Audio input | Yes |
| Aspect ratio | 16:9 |
| RS-232 ports | 0 |
| Network ready | No |
| Power supply type | AC/DC |
| Dimensions (WxDxH) | 60 x 117 x 21 mm |
| Connectivity technology | Wired |
| Focus | Manual |
| Focal length range | - mm |
| Lamps quantity | 1 lamp(s) |
| Service life of light source | 20000 h |
| RMS rated power | 1 W |
| Audio formats supported | AAC, AMR, APE, MP3, MS-ADPCM, WMA |
| Image formats supported | BMP, JPG |
| Video formats supported | 3GP, ASF, AVI, H.263, H.264, M-JPEG, MOV, MPEG4, VC-1, VOB, WMV, XVID |
| Document formats supported | DOC, DOCX, HTML, XLS, XLSM |
| Number of built-in speakers | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatible memory cards | SD, SDHC |
| Maximum memory card size | 32 GB |
| Internal storage capacity | 1 GB |
| Noise level | - dB |
| Product type | Portable projector |
| Product color | Black |
| Market positioning | Portable |
| Power source | AC/Battery |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Battery life (max) | 1.5 h |
| Power consumption (standby) | - W |
| Cables included | AV, VGA |
Weight and Dimensions| Depth | 117 mm |
|---|---|
| Width | 60 mm |
| Height | 21 mm |
| Weight | 145 g |
To Next Page
