Do you have a question about the Optoma PRO360W and is the answer not in the manual?
display type | Single 0.65” DMD DLP Technology by Texas Instruments |
---|---|
native resolution | 1280 x 800 |
maximum resolution | 1920 x 1080 |
brightness (typical) | 3000 ANSI Lumens |
---|---|
contrast ratio | 3000:1 (Full On/Full Off) |
uniformity | 85% |
throw ratio | 1.55 to 1.7:1 (Distance/Width) |
---|---|
projection distance | 3.28’ to 32.8’ (1.0 to 10m) |
image size (diagonal) | 27.2” to 301” (0.58 to 7.62m) |
audio | 2-Watt Speaker |
---|---|
horizontal scan rate | 15.3 - 91.1 KHz |
vertical refresh rate | 25 - 85Hz, 120Hz |
power supply | AC Input 100-240V, 50-60Hz, Auto-Switching |
---|---|
power consumption | 247 Watts (Bright), 200 Watts (Standard), <5 Watts (Standby-Active), <1 Watt (Standby-Eco) |
lamp life and type | 6000/3000 Hours (Standard/Bright) 200W |
operating temperature | 41 to 104°F (5 to 40°C), 85% Max Humidity |
---|---|
noise level (standard/bright) | 29dB/35dB |
keystone correction | ±40° Vertical |
weight | 5 lbs (2.27kg) |
---|---|
dimensions (W x H x D) | 11.28” x 3.98” x 7.6” (287 x 101 x 193 mm) |
offset | 115% |