Need help?Do you have a question about the Optoma TX542 and is the answer not in the manual?
General| Resolution | XGA (1024 x 768) |
|---|---|
| Weight | 2.3 kg |
| Display Type | DLP |
| Video Modes | NTSC, PAL, SECAM |
| Connectivity | HDMI, VGA, Composite, USB, RS232 |
| Max Resolution | 1600 x 1200 |
| Aspect Ratio | 4:3 (Native), 16:9 (Supported) |
| Lamp Type | UHP |
| Projection Size | 30" - 300" |
| Lamp Life | 4000 hours (Normal mode), 10000 hours (Eco mode) |
| Throw Ratio | 1.96 - 2.15:1 |
| Noise Level | 33 dB (Normal mode), 29 dB (Eco mode) |
Details of RS232 connector pin numbers and their specifications.
Commands for controlling projector power, mute, and freeze functions.
Commands to adjust display modes, brightness, contrast, sharpness, and color settings.
Commands for selecting input sources like HDMI, VGA, and S-Video.
Commands for format, overscan, zoom, image shift, and keystone adjustments.
Commands to set the projector's language and projection mode (e.g., Front-Desktop).
Commands for controlling OSD menu location and signal frequency/phase.
Commands related to security settings, timer, and system alert reset.
RS232 commands to emulate remote control functions like mouse and menu navigation.
Commands to read projector information like software version, power state, and lamp hours.
To Next Page
