C 0876A 165mm 2 Way Round Wireless Ceiling Speaker Pair
1. Please read the instructions carefully before installing and using the speakers. Keep the manual safe for
future reference.
2. Prior to installing the speakers into any ceiling/wall, check the structure for weight bearing ability and
avo bearing ability and avoid contact with any wiring or plumbing that might be behind the surface area.
Installing on soft material or in area incapable of supporting the speakers’ weight may cause personal
injury or damage to the speaker.
3. Make sure the speaker is properly secured to the ceiling/wall. Please use the proper screws, bolts or
anchors. Failure to do so may cause the speaker to become unsecured and cause potential damages/
injuries.
4. Damage to the woofer and tweeter may occur if the speaker is dropped or hit, resulting in no sound or
distorted sound.
5. Never overdrive your speakers to the point of distortion and always reduce volume prior to switching
input sources (e.g FM to CD).
6. Use only approved and certied wiring in your installation, do not stretch or place the wire in contact
with sharp objects.
7. Prior to removing cables ensure all power to your amplier and other components is turned off.
Safety:
Speaker Overview:
LED Indicator
209mm
(template required)
hole cutout
100mm ceiling
depth required
1
2
3
4
5
IR Receiver
Reset Button
Pivoting Tweeter
6.5”(165mm) Polypropylene Cone
To Next Page
Loading...