Opus Goldpress 5 - Device Description and Components

Goldpress 5 • User guide
EN
The Goldpress 5 is fitted with a heater element of 200 x 100 mm giving you a large area
for hot print stamping, it comes with a microprocessor controller and LED digital display
with an audible sound plus two buttons to set and control the temperature, stamping
time and sound which ensures constant work conditions. Frames with a choice of type-
face fonts, matrix/logo or both are mounted on the heater. There are movable side and
back stop guides, plus rulers printed on the base that help you to position a cover in the
correct place so that you can position your text / logo where you want or centralize it on
the cover. There is a foil holder (13) and cutter (14) which lets you cut of the right amount
of foil for the job.
1 - Handle
2 - LED display and buttons
3 - Heater
4 - Scale
5 - Draw for accessories
6 - Main power switch and socket
7 - Hannel insertion holes
8 - Base with regulator plates
9a - Side stop guide front 1
9b - Side stop guide back 2
9c - Rear stop guide
10 - Typeface frame *
11 - Frame O. Master Frame GP5
12 - Stand Holder O.Frame GP5
13 - Foil roll holder
14 - Foil cutter
15 - Magnetic stop
16 - O.Goldchannel Base
GP5/GP4-2017
17 - Channel jig GP5*
18 - Ruler GP5 *
2
DESCRIPTION
9c
9b
9a
Golpress 5 (top view)
1
5
2
3
4
7
9a
9b
6
8
4
10
12
11
16
18
17
*not included as standard
thumbscrew
Dig.1
Dig.2
Dig.3
Dig.4
Dig.6
13
14
15
Dig.5