30
STEP 2 Installing the new filter cartridge
Insert the new filter and turn
clockwise to tighten it.
Plug in the power cord and switch the
machine on. Touch and hold the „RESET”
icon, the reset indicator and the filter
number flash (you will hear a beep), then
touch „RESET” to select the number of the
replaced filter. Touch and hold „RESET”
again for 3 seconds to complete the reset
(you will hear a beep).
Reset
Attention. To ensure safe drinking water, always use original filters. In case of instal-
lation problems, contact the service department.
Cleaning the housing
Wipe the housing of the machine with a dry and soft cloth. Remove stubborn dirt with
a damp cloth.
Cleaning the water receiver
The water receiver should be emptied and cleaned regularly.
Removing the water receiver
Remove the water receiver from the machine, lift up the water receiver protective grid.
Then rinse the water receiver and protective grid under running water with a soft cloth
or brush. soft cloth or brush. Dry both items.
Mounting the water receiver. Place the protective grid on top of the water receiver and
mount the whole thing in front of the machine. The tray is fixed with a magnet.
To Next Page
Loading...
Need help?
General