Footswitch
Connect a latching footswitch (e.g. FS-1) to this jack socket to remotely engage/defeat
theGain and Blend controls. Use a standard instrument/tip-sleeve(mono) cable to connect the footswitch.
Volume
Adjusts the overall output volume level.
Treble
(Active and post-Blend)
Adjusts the high-end frequencies. Increasing the Treble control produces brighter tones. Higher Gain settings
will also add high-end frequencies. Reduce the Treble control to compensate if necessary.
Middle
(Active and post-Blend)
Adjusts the mid-range frequencies.
To Next Page
Loading...
