Bass
(Active and post-Blend)
Adjusts the low-end frequencies. Increasing the Bass control produces deeper tones.
Blend
Controls the amount of upper harmonics blended with the clean signal. The character of the blended signal is
defined by how the Gain control is set. Higher Blend settings will add extra volume, so you may adjust the
master Volume to compensate if necessary. With the Gain set to minimum, the Blend control will have the
least effect on the overall sound.
Gain
Controls the level of gain added to the upper harmonics. TheGain control works in tandem with
the Blend control for a variety of sounds. Higher Gain settings produce dirtier tones, whilst
lower Gain settings combined with a higherBlend setting can be used for a ‘clean’ boost to cut through the mix.
To Next Page
Loading...
