Need help?Do you have a question about the ORANGE OB1 Series and is the answer not in the manual?
Correct speaker load and power handling must be connected to prevent damage.
Ensure adequate ventilation and avoid electronic noise sources for optimal performance.
Connect instrument; select Active/Passive for correct input level.
Shape tone by blending clean and gain signals; controls harmonics.
Adjust low, mid, and high frequencies for fine tone control.
Adjusts the overall output volume level.
Connect footswitch for remote control; power switch for on/off.
Outputs for connecting to mixers/PA systems.
Cooling vent for the amplifier; do not obstruct.
Connect speaker cabinets; minimum impedance 4 Ohms.
Set voltage for region; connect power cable.
Location and replacement guidelines for the mains fuse.
Displays model, output power, and serial number.
Correct speaker load and power handling must be connected to prevent damage.
Ensure adequate ventilation and avoid electronic noise sources for optimal performance.
Connect instrument; select Active/Passive for correct input level.
Shape tone by blending clean and gain signals; controls harmonics.
Adjust low, mid, and high frequencies for fine tone control.
Adjusts the overall output volume level.
Connect footswitch for remote control; power switch for on/off.
Outputs for connecting to mixers/PA systems.
Cooling vent for the amplifier; do not obstruct.
Connect speaker cabinets; minimum impedance 4 Ohms.
Set voltage for region; connect power cable.
Location and replacement guidelines for the mains fuse.
Displays model, output power, and serial number.
General| Channels | 1 |
|---|---|
| Effects Loop | No |
| Blend Control | Yes |
| Inputs | 1 x 1/4" |
| Controls | Volume, Bass, Middle, Treble, Blend |
| Speaker Output | 1 x 1/4" |
| EQ | 3-band EQ (Bass, Middle, Treble) |
To Next Page
