User Interface
This air purifier has 5 fan speeds so you can set the fan speed to the desired air flow
and noise level. To stop the fan you can set the speed to 0.
NOTE: Each filter has a life of about 12 months. To reset the filter indicator, press and
hold the reset button for 3 seconds to turn off the light.
Power Switch
The Off/Reset switch at the back of the air purifier serves two
purposes:it controls power to the unit and works as a circuit
breaker.
To operate the air purifier the reset/On side of the switch must be
pressed down. There is no light with this switch so it will not
illuminate when on. This is to keep the unit from generating light if
used in a bedroom.
THE EXTERNAL STRUCTURE OF AIR PURIFIER
07
A I R P U R I F I E R O V E R V I E W
R E S E T F I L T E R I N D I C A T O R
To Next Page
Loading...
Need help?
General
