WIRELESS MODE
1. Long press and hold " " to turn speaker on;
2. M91 is ready to pairing, the LED indicator will be
flashing white, Usually set the steps to enter the "Settings"
- > "M91";
3. Once paired successfully, the power indicator turns blue
and makes a prompt sound.
4. When incoming call, Short press" " button to
answer. Hang up, please press " "again .
Note:
(1). If the speaker is in low power or in weak state,
sometimes it may not be connected to the phone, PC,
IPAD or other devices. please charging immediately
before using.
(2). When the enable audio device is connected, if it is
exceeds the connection distance over 10M, the signal will
be disconnected. when you closing the speaker, it will
automatically be reconnected.
5
To Next Page
Loading...