8
EN
2. Special safety instructions.
Read carefully!
• The electrical device is designed and manufactured in such a way as
to allow safe operation and use by unauthorized personnel. Despite all
precautions taken by the manufacturer for safe use, operation and use,
there are certain residual risks and potential hazards associated with
them.
• The following symbols and their meanings have been used on the
device and in the accompanying documentation to indicate potential
hazards:
This symbol alerts users that the device is operating with
hazardous electrical voltages. Do not remove the protective
covers on the device.
Failure to follow the safety instructions while using and opera-
ting the device may result in:
Risk of electric shock! Risk of serious injury or death!
This symbol alerts users that if the safety instructions for using
and operating the device are not followed, there is a risk of:
Risk of serious injury or death! Risk of device damage or other
property damage!
This symbol indicates that the product is made with double
insulation between hazardous live parts (parts with dangerous
voltage from the power supply) and parts that are accessible in
normal use.
This symbol indicates that protection against electric shock
is ensured by a safe low voltage (SELV), so that the device
is operated only by batteries or a rechargeable battery. The
battery is not
repeatedly charged outside the device.
The main part of the device is designed as a protection class III
construction.
Transportation/Transfer
• During transport and use e.g. Take care when moving the truck to
prevent the device from toppling over.
• Do not carry the device until the mains is disconnected.
• The device is intended for manual operation/moving and carrying when
in use.
• Carry the device by its grip when carrying it. Do not move or carry
the device by the power cord. Risk of serious injury or death! Risk of
equipment damage!
To Next Page
Loading...
