Orava EV-520 - Page 6

6
EN
• Do not use the device near strong electromagnetic fi elds.
Electromagnetic fi eld effects can affect the correctness of
electronic device functions.
• Store the equipment in a clean and dry place. Do not load the
device when storing.
• Never overload the equipment beyond the limits specifi ed in the
technical data!
• Do not overload the device above the measuring range.
• Do not continue to use the device if you notice any non-standard
features while using the device. Have the device checked by a
specialist garage.
• If any safety part/component (mechanical, electrical/electronic) is
part of the equipment, never disassemble this part/component! if it
is safety part/component damaged or inoperative, do not use the
device!
• Never underestimate possible hazards and be careful!
Power Supplies/Batteries
Safety instructions for changing and loading the power supply - batteries
Warning!
• When using electrical/electronic equipment that is equipped with a DC power
source - battery , always follow important safety and operating instructions and
handling of these sources.
Warning!
• Never recharge batteries!
• Never disassemble the batteries!
• Never heat or dispose of batteries in a fi re!
• Failure to follow the safety instructions may result in: Risk of serious injury!
Danger of explosion!
Chemical hazard!
Risk of equipment damage or other material damage!
Warning!
• There is a danger of incorrect replacement and handling - electric short circuit,
explosion, electrolyte leakage, chemical burns.
• Dispose of the batteries in accordance with the applicable regulations and
disposal of electronic equipment.