EasyManuals Logo

Orban 8218 User Manual

Orban 8218
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
IMPORTANT SAFETY
INSTRUCTIONS
All the safety and
operating
instructions should be
read before
the appliance is operated.
Retain Instructions: The safety and operation instructions should
be
retained
for future reference.
Heed Warnings:
All warnings
on the
appliance
and in the operating instructions
should
be adhered
to.
Follow Instructions: All operation and user instructions should
be followed.
Water and
Moisture: The
appliance
should not
be used near water (e.g., near
a bathtub, washbowl, kitchen sink,
laundry
tub,
in
a wet
basement, or near
a
swimming pool,
etc.).
Ventilation: The appliance should
be
situated
so
that
its
location
or position
does
not interfere
with its proper ventilation.
For example,
the
appliance
should
not
be
situated on
a bed,
sofa, rug, or similar
surface that may block
the ventilation openings; or, placed
in a built-in
installation, such as a bookcase or cabinet that may impede the flow of air
through the ventilation
openings.
Heat: The appliance
should
be situated away
from
heat sources such
as
radiators,
heat registers,
stoves, or other appliances
(including
amplifiers) that produce heat.
Power Sources: The appliance should
be
connected
to a
power
supply only of the
type described in the
operating instructions or
as
marked on the appliance.
Grounding or Polarization : Precautions should be taken
so
that the grounding
or polarization
means of an appliance
is not defeated.
Power-Cord Protection: Power-supply cords should
be
routed
so that they are not likely
to be walked on or pinched
by items placed
upon or against them, paying particular attention to cords
at plugs,
convenience
receptacles, and
the point where they exit from
the appliance.
Cleaning: The
appliance
should be cleaned only as recommended
by
the
manufacturer.
Non-Use Periods: The power cord of the appliance should
be unplugged from the outlet
when left unused for
a
long
period of time.
Object and
Liquid
Entry: Care should be taken so that
objects do
not fall
and liquids are not spilled into
the enclosure
through
openings.
Damage Requiring Service: The appliance should
be
serviced
by
qualified
service personnel when:
The power supply
cord
or the plug has been damaged; or
Objects
have fallen, or liquid
has been
spilled into the
appliance; or
The appliance has been exposed
to
rain; or
The appliance does not appear
to
operate normally or exhibits
a marked change in performance;
or
The appliance has been dropped, or the enclosure
damaged.
Servicing: The user should not attempt to service the
appliance beyond that described
in the operating instructions. All other
sen/icing
should
be
referred to qualified service personnel.
The
Appliance should be used only with
a cart or
stand that is
recommended
by the
manufacturer.
Safety Instructions
(European)
Notice For U.K. Customers If Your
Unit Is Equipped With
A Power Cord.
WARNING: THIS APPLIANCE
MUST BE EARTHED.
The cores in the mains lead are
coloured in accordance with
the
following
code;
GREEN and YELLOW
-
Earth
BLUE
-
Neutral
BROWN
-
Live
As colours
of the cores in
the mains lead of this appliance
may not correspond with
the coloured markings identifying the
terminals
in your
plug, proceed
as
follows:
The
core which is coloured
green and yellow must
be connected to the terminal in the
plug marked
with the
letter
E, or
with
the earth symbol,
(A),
or
coloured
green, or
green and yellow.
The core
which
is coloured blue
must be connected
to
the terminal
marked N or coloured
black.
The core
which
is coloured brown
must be connected
to
the terminal
marked L or coloured red.
A
The power cord
is
terminated
in a CEE7/7 plug (Continental
Europe). The green/yellow
wire is connected
directly to the
unit's chassis. If
you need to change the
plug and if you are qualified to
do so, refer to the table below.
WARNING: If
the ground is defeated, certain fault
conditions in the unit or in
the system to which
it is connected can
result in full line
voltage between
chassis and earth ground. Severe
injury or
death can then
result
if the
chassis and earth ground
are touched simultaneously.
CONDUCTOR
WIRE
COLOR
Normal
Alt
L LIVE
BROWN
BLACK
N NEUTRAL
BLUE
WHITE
E EARTH GND
GREEN-YELLOW
GREEN
AC Power
Cord Color Coding

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Orban 8218 and is the answer not in the manual?

Orban 8218 Specifications

General IconGeneral
BrandOrban
Model8218
CategoryInverter
LanguageEnglish