Orbegozo FDR 16 - Troubleshooting Guide

FDR 16
16
TROUBLESHOOTING GUIDE
Problem
Possible cause
Solution
Fryer does not
work
Fryer not plugged in
Check fryer is plugged in
Fuse blown
Check the fuse/circuit breaker
for your installation and replace
the fuse if necessary. If this does
not solve the problem refer to the ‚service‛
Section.
Overheating
Wait for the fryer to cool and press the "RESTART"
button on the back of the head.
Oil overflowing
Maximum oil level exceeded
Check oil level
Wet food placed in oil
Drain and dry food thoroughly
The oil is old and has
deteriorated
Replace with fresh oil
Incorrect oil used/different oils
mixed together
Use a good quality oil suitable for deep frying
Unpleasant
Odour/Oil
smokes
The oil is old and has
deteriorated
Replace with fresh oil
The oil is not suitable for deep
frying
Use a good quality oil suitable for deep frying
Poor frying
performance
Incorrect temperature used
Select the correct temperature
Basket overloaded
Reduced the quantity fried
Fresh chips too wet
Drain and dry the chips thoroughly
TECHNICAL PARAMETERS
Model
Voltage
Power
Frequency
Capacity
FDR 16
230 V
1500 W
50 Hz
1.5 L
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out ‚wheeled bin‛ symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separately
collected. Consumers should contact their local authority or retailer for information concerning
the correct disposal of their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage
Directive 2006/95/EC and the requirements of the EMC directive 2004/108/EC.