Orbegozo FDR 25 - User Manual

Questions and Answers

G
Garrett KnappAug 11, 2025
Why my Orbegozo FDR 25 does not work?
- B
  bbrownAug 11, 2025
  If your Orbegozo Fryer isn't working, start by ensuring it's properly plugged into the power outlet. Another potential cause could be a blown fuse; inspect the fuse or circuit breaker and replace the fuse if needed. If the issue persists, it might be due to overheating. In this case, allow the fryer to cool down completely, then press the "RESTART" button located on the back of the head.
N
Natasha PatelAug 18, 2025
What to do if the oil is overflowing in my Orbegozo FDR 25 Fryer?
- J
  John Herrera Jr.Aug 18, 2025
  If the oil in your Orbegozo Fryer is overflowing, there are several possible reasons. First, check that you haven't exceeded the maximum oil level. Also, ensure that any food you're placing in the oil is thoroughly drained and dry. The oil itself might be the problem; old or deteriorated oil, or using the wrong type of oil, or mixing different oils can cause overflowing. Replace the oil with a good quality oil suitable for deep frying.
K
Karen HudsonAug 26, 2025
Why does my Orbegozo FDR 25 produce an unpleasant odour or the oil smokes?
- R
  Robert FieldsAug 26, 2025
  If your Orbegozo Fryer is producing unpleasant odors or the oil is smoking, it's likely due to the oil's condition. The oil may be old and deteriorated, in which case you should replace it with fresh oil. Alternatively, the oil might not be suitable for deep frying; ensure you are using a good quality oil specifically designed for deep frying.
C
Craig ClarkSep 2, 2025
How to improve the frying performance of my Orbegozo FDR 25 Fryer?
- F
  Francisco MillerSep 2, 2025
  If your Orbegozo Fryer isn't frying food properly, several factors could be responsible. Ensure you're using the correct temperature setting for the food you're frying. Avoid overloading the basket, reduce the quantity of food being fried at once. If you're frying fresh chips, make sure they are properly drained and dried before adding them to the fryer.