English
- 48 -
Orus Programmable Thermostat User Manual
- 49 -
Orus Programmable Thermostat User Manual
ADVANCED PROGRAMMING
• In advanced programming it is possible to access the following operation
parameters:
-
regulation type
-
parameters for regulation type
-
antifreeze temperature
-
temperature measurement unit
-
external probe presence
-
regulation probe selection
-
keypad lock password
-
system operation hours
-
battery charge status
• Field (22) will display the writing
“rEG=” and on field (16) letter
“O” (ON-OFF programming) or “P”
(proportional programming) will
flash.
• To enter advanced programming,
press the “PRG” key for more than 3
seconds.
The parameter to be modified will
flash; using
“ ”
and
“ ”
it is
possible to modify its value. Use
“ ”
to confirm the setting and move on
to the next parameter. Once the
last parameter has been confirmed,
you will exit the menu and the
programmable thermostat will
restore operation with the previously
set operation.
Regulation type (only for winter operation)
To Next Page
Loading...
