To Next PageTo Next PageWhy do stations turn on when they are not supposed to on my Orbit Timer?
If stations on your Orbit Timer are activating unexpectedly, the issue might be due to excessive water pressure, more than one programmed start time, an incorrect AM/PM setting, or the activation of the B program.
Why do valves continue to turn on and off when they are not programmed on Orbit Timer?
If the valves on your Orbit Timer are turning on and off erratically outside of the programmed schedule, the cause might be: * Multiple start times programmed with overlapping schedules. * Excessive pressure. * The B program is activated.
Identifies and describes the main components of the timer unit.
Guidance on choosing a suitable location for timer installation.
Instructions for physically mounting the timer unit to a wall.
Steps for wiring the timer to sprinkler valves.
Instructions for connecting the electrical transformer power.
Steps to activate the backup battery for memory retention.
Guides through setting clock, date, start times, and run times.
Details options for setting watering frequency (days, intervals, odd/even).
Explains how to review or modify existing watering schedules.
How to temporarily delay watering for 24, 48, or 72 hours.
Instructions for manually running individual stations or programs.
Guide to connecting and managing the rain sensor feature and bypass.
General
